Angold Updates Drilling At Dorado Indicating New Gold Zones

VANCOUVER, BCJune 22, 2021 /CNW/ – Angold Resources Ltd. (TSXV: AAU) (FRA: 13L1) (OTCQB: AAUGF) (“Angold” or the “Company”) is pleased to announce that it has received further assay results from the Lajitas area at the Company’s Dorado project in the Maricunga belt of Chile.

Angold’s CEO, Mr. Adrian Rothwell, stated: “These results are extremely compelling with newly defined zones of mineralization, gold in all drill holes to date, and further large step outs. As the synthesis and interpretation of Lajitas results is being compiled, we are also targeting at Lajitas South with a final program of geophysics prior to drilling. With gold mineralization at surface at Lajitas South, and further expansion at Lajitas, the Dorado project certainly has the potential to be a major deposit in the region.”

Key Highlights

Lajitas 2021 Drilling Highlights:

  • 301 m at 0.71 g/t Au beginning at surface in hole DO-21-01
  • 110 m at 0.75 g/t Au beginning at 200 m in hole DO-21-02
  • 248 m at 0.75 g/t Au beginning at 168 m in hole DO-21-03
  • 84 m at 0.40 g/t Au beginning at 166 m in hole DO-21-04
  • 196 m at 0.51 g/t Au beginning at 296 m in hole DO-21-07

Another Extension: Hole DO-21-07 extends mineralization 85 m NW and 130 m below historic drilling (hole LJ10027r) on the NE edge of the deposit, and stepped out 100 m NE of DO-21-01.

High Grade: Results in Phase I demonstrate the higher grade potential of the deposit (68 m at 1.30 g/t Au beginning at 156 m in DO-21-01, and 74 m at 1.25 g/t beginning at 194 m in DO-21-03) with intercepts over 1 g/t Au in many holes.

New Zones: A new zone was discovered near the bottom of DO-21-02 (30 m at 1.24 g/t Au), which has extended the West Zone of mineralization at depth by approximately 80 m below historic drill hole SF01. Two new zones were intersected near the top of DO-21-02. Shorter intercepts identified new zones in holes DO-21-06 and DO-21-08, extending mineralization to the SSW.

Extensive Mineralization: Gold mineralization at Lajitas has now been confirmed over a vertical extent of at least 450 m and beginning from surface, and between the East and West Zones.

Structural Interpretation Underway: Interpretation of 2021 drill results is being synthesized with historic results to determine future expansion targets.

Further Drilling Scheduled: The Company is planning a significant second drill program for later in 2021.  Infrastructure remains at site for further 2021 drilling.

Undrilled Targets Remain: Lajitas South results show a previously unrecognized mineralized system approximately 1.2 x 2.2 km, a factor larger than Lajitas with grades at surface of up to 0.63 g/t Au. The recently identified Lajitas South target features multiple overlapping anomalies consistent with other major deposits in the Maricunga Belt and will be drilled later in 2021.

Figure: Cross-section looking ESE (123°) demonstrates Hole DO-21-07 step-out at depth. (CNW Group/Angold Resources Ltd.)

Drilling Context and Geology

Hole DO-21-07, which aimed to test the depth potential below hole DO-21-03, returned 196 m at 0.51 g/t Au and included 28 m at 1.04 g/t Au. Consistently high grades (up to 4.06 g/t Au (over 2 m)) were experienced in this initial Phase I of test drilling. These include grades over 1 g/t Au in multiple long intercepts of up to 74 m in oxide material. New zones have been identified and mineralization remains open to the NE, SW and at depth. A total of 4,255 m of drilling has been completed and holes 8 and 9 are pending assay.

Mineralization in DO-21-07 demonstrates depth potential for at least 130 m below DO-21-01 along a strike length of over 200 m and is open at depth.

Phase 1 drilling has confirmed that Lajitas is a porphyry gold/epithermal gold deposit typical of major deposits in the Maricunga Belt. Drilling has confirmed that gold is hosted in banded quartz-magnetite veins and epithermal-type quartz veins in a hydrothermal breccia surrounding a diorite porphyry. Mineralization is strongly fracture controlled, located adjacent to a prominent triple intersection between faults that strike NNE, NNW, and ENE.  As discussed in the previous press release (ANGOLD DRILLS 248 METRES AT 0.75 G/T IN STEP-OUT HOLE AT DORADO on May 25), the presence of two distinct types of gold-bearing mineralization in the Lajitas deposit expands the scope of exploration on the project, providing multiple deposit types to target.

Drilling has expanded the previously drilled deposit and indicates potential for a Maricunga type pipe-like deposit with excellent depth potential. At this stage, the deposit is more than 600 meters wide and 450 m deep. Drilling has expanded the depth potential from the average 300-m depth of drilling to about 450 m, and the deposit is open at depth.

The Lajitas hydrothermal system is vertically and horizontally zoned with deeper gold-bearing vein mineralization occurring with biotite-magnetite alteration overprinted by chlorite-illite and grading outward to illite-kaolinite-smectite clay alteration. Shallowest alteration is characterized by alunite-kaolinite-quartz with local gypsum veinlets. These alteration types are typical of other Maricunga deposits in the region, and the zoning indicates additional potential at depth, similar to many surrounding deposits. The alteration patterns also provide important vectors for other, larger exploration targets on the project; combined with the recognition of mineralization hosted in hydrothermal breccias at NNW-NNE structural intersections, they provide powerful guides to mineralization.

Drill results have provided the geologic understanding required to effectively target drilling on numerous geologic, geochemical, and geophysical targets on the project with similar signatures and settings to Lajitas, indicating impressive potential for gold mineralization. Interpretation and drill targeting is underway for these additional expansion opportunities.

DRILL RESULTS

Table 1: Assay Results

Hole ID

Length, m

g/t Au

From, m

To, m

Notes

DO-21-01

302

0.71

0

302

including

34

0.90

76

110

and

68

1.30

156

224

DO-21-02

16

0.35

58

74

DO-21-02

16

0.38

116

132

DO-21-02

110

0.75

200

310

including

30

1.04

228

258

and

32

1.11

270

298

DO-21-02

30

1.24

408

438

Extended

DO-21-03

248

0.75

168

416

Extended

including

74

1.25

194

268

and

26

1.12

348

374

DO-21-04

84

0.40

166

250

New, extended

DO-21-04

18

0.25

324

342

DO-21-04

14

0.21

358

372

DO-21-05/5A

12

0.60

78

90

Hole Lost, Targets Not Tested

DO-21-05/5A

14

0.31

102

116

Hole Lost, Targets Not Tested

DO-21-06

40

0.27

2

42

Hole Lost, Targets Not Tested

DO-21-07

196

0.51

296

492

including

20

0.85

328

348

and

28

1.04

420

448

DO-21-08

16

0.60

0

16

DO-21-08

28

0.36

72

100

Table 2. Dorado drill-hole collar table.

Hole ID

 Collar
East
WGS84

Collar
North
WGS84

Collar
Elev m

Collar Az

Collar
Dip

Total
Depth m

DO-21-01

507080

6980110

4,562

120

-60

540

DO-21-02

507350

6979975

4,555

290

-45

484.5

DO-21-03

507093

6980248

4,583

164

-54

513.7

DO-21-04

507200

6979970

4,521

282

-70

518

DO-21-05

506893

6980142

4,525

110

-60

95

DO-21-05A

506893

6980146

4,525

110

-60

116

DO-21-06

506758

6979876

4,466

102

-55

309

DO-21-07

507355

6979972

4,585

316

-55

630

DO-21-08

507000

6979900

4,485

115

-60

402

DO-21-09

507445

6980055

4,585

316

-55

647

Total

4,254

QAQC Statement

All of Angold Resources’ drill sample assay results have been independently monitored through a quality assurance/quality control (“QA/QC”) protocol which includes the insertion of blind standard reference materials, blanks, and duplicates at regular intervals. Logging and sampling of the Dorado drill samples were completed at Angold’s core handling facilities located in Copiapo, Chile. Drill core was diamond sawn on site and half drill-core samples were securely transported to ALS Laboratories’ (“ALS”) sample preparation facility in Copiapo.

Gold content was determined by fire assay of a 50-gram charge with atomic absorption finish (ALS method Au-AA24). Thirty-three other elements were analyzed by ICP methods with four-acid digestion (ALS method ME-ICP61m). ALS Laboratories is independent of Angold Resources and its facilities are ISO 17025 accredited. ALS also performed its own internal QA/QC procedures to assure the accuracy and integrity of results. Parameters for ALS’ internal and Angold’s external blind quality control samples were acceptable for the samples analyzed. Angold is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of its drill results data.

Qualified Person
David Smith, CPG, a Qualified Person in accordance with National Instrument 43-101, has reviewed and approved the technical information contained in this news release.

About Angold
Angold is an exploration and development company targeting large-scale mineral systems in the proven districts of the Maricunga, Nevada and Ontario. Angold owns a 100% interest in the Dorado, Cordillera and South Bay-Uchi projects, and certain claims that append the optioned Iron Butte project.

ON BEHALF OF THE BOARD OF ANGOLD RESOURCES LTD.

“Adrian Rothwell”
Chief Executive Officer

Further information on Angold can be found on the Company’s website at www.angoldresources.com and at www.sedar.com, or by contacting the Company by email at investors@angoldresources.com or by telephone at (866) 852 8719.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward Looking Statements: This news release contains forward-looking statements and forward-looking information within the meaning of applicable securities laws. These statements relate to future events or future performance and includes expectations of the resumption of trading of the Company’s common shares on the Exchange. All statements other than statements of historical fact may be forward-looking statements or information. Forward-looking statements and information are often, but not always, identified by the use of words such as “appear”, “seek”, “anticipate”, “plan”, “continue”, “estimate”, “approximate”, “expect”, “may”, “will”, “project”, “predict”, “potential”, “targeting”, “intend”, “could”, “might”, “should”, “believe”, “would” and similar expressions. Forward-looking statements and information are provided for the purpose of providing information about the current expectations and plans of management of the Company relating to the future. Readers are cautioned that reliance on such statements and information may not be appropriate for other purposes, such as making investment decisions. Since forward-looking statements and information address future events and conditions, by their very nature they involve inherent risks and uncertainties. Actual results could differ materially from those currently anticipated due to a number of factors and risks. Accordingly, readers should not place undue reliance on the forward-looking statements, timelines and information contained in this news release.

Angold Resources Ltd. Logo (CNW Group/Angold Resources Ltd.)

Cision View original content to download multimedia:http://www.prnewswire.com/news-releases/angold-updates-drilling-at-dorado-indicating-new-gold-zones-301316816.html

SOURCE Angold Resources Ltd.

Cision View original content to download multimedia: http://www.newswire.ca/en/releases/archive/June2021/22/c3665.html