Barrian Mining Drills 148 g/t Silver Over 4.6 Metres at Uncle Sam Prospect

VANCOUVERNov. 4, 2019 /CNW/ – Barrian Mining Corp. (“Barrian” or the “Company“) (TSX-V: BARI, OTCQB: BARRF, FSE: BM5) is pleased to report analytical results for from the first, 2019 hole drilled at the Uncle Sam Prospect from the recently completed 1,838 metre reverse circulation (RC) drilling program at its flagship Bolo Gold-Silver Project. Hole BL19-09 intersected high-grade silver, yielding 148 g/t silver (1.77 g/t gold equivalent2) over 4.6 metres within a broader zone of 74.9 g/t silver (0.90 g/t gold equivalent2) over 22.9 metres. The Uncle Sam Zone lies 500 metres south of the South Mine Fault Zone. A new 2019 rock grab sample collected between the zones yielded 3.63 g/t gold with 262 g/t silver in outcrop in an area with no prior sampling. The new drill hole and surface sample provides opportunity for continuity of mineralization along a 500 metre strike length within the 1.2 kilometre Bolo Trend.

Maximilian Sali, CEO and Co-Founder comments, “We are pleased to add another significant intercept that further expands the footprint of silver and gold mineralization. The 2019 drilling program has surpassed our expectations, drilling and surface sampling further reinforces our interpretation that the two zones are connected along strike. The high-grade silver at Uncle Sam Zone may be related to deep silver mineralization at the South Mine Fault Zone. The full strike potential at the Bolo Project has not yet been realized.”

These intercepts extend high grade silver mineralization at Uncle Sam approximately 50 to 75 metres vertically below surface channel rock chip samples, including 3,146 g/t silver and 1.0 g/t gold over 2.6 metres and 365 g/t silver and 1.9 g/t gold over 3.6 metres3; and 20 metres north along strike in the subsurface from previous drill hole BL-54, which intersected 94.3 g/t silver over 21.3 metres, including 251 g/t silver over 6.1 metres3. Hole BL19-09, drilled at the Uncle Sam Prospect, intersected high grade silver, yielding 148 g/t silver (1.77 g/t gold equivalent2) over 4.6 metres starting at 57.9 metres down hole, within a broader zone of 74.9 g/t silver (0.90 g/t gold equivalent2) over 22.9 metres starting at 41.2 metres down hole3 (Figure 1).

The Uncle Sam Prospect is located 500 metres south and 250 metres vertically below, the South Mine Fault Zone. Modelled RC drill intercepts indicate the presence of a distinct silver (+/- gold) mineralized zone offset approximately 100 to 150 metres west and up to 200 metres below surface within the footwall of the main South Mine Fault gold zone, suggesting the potential for continuity of gold-silver mineralization between Uncle Sam and South Mine Fault Zone. Combined historical and 2019 RC drilling demonstrates the presence of gold-silver mineralization over a 350 metre vertical extent. A new 2019 rock grab sample collected between the South Mine Fault Zone and Uncle Sam yielded 3.63 g/t gold with 262 g/t silver in outcrop. The presence of high-grade mineralization in outcrop between Uncle Sam and South Mine Fault Zone further supports the potential for continuity of mineralization between the zones.

Table 1: 2019 Bolo Gold-Silver Project RC Drilling – Uncle Sam Zone Hole BL19-09

Hole ID









Ag (g/t)



Down-dip extension of mineralization

from surface channel samples






Extends high grade silver at Uncle

Sam 50-75 m below surface and 20 m

north along strike of previous drill

hole BL-54 in subsurface






The true width of mineralization in most drill holes is estimated to be approximately 60-70% of drilled width


Gold equivalent values were calculated at an 83.5 to 1 gold to silver ration, and assuming metallurgical recoveries of 100%


The true width of mineralization at Uncle Sam is unknown


Hole BL19-09 (-50° dip / 295 azimuth) was drilled at the Uncle Sam Prospect, targeting the down-dip extension of high grade silver in surface channel rock chip samples, including 3,146 g/t silver and 1.0 g/t gold over 2.6 metres and 365 g/t silver and 1.9 g/t gold over 3.6 metres2; and the strike extension of previous intercepts drilled by Allegiant Gold Ltd. from hole BL-54, comprising 94.3 g/t silver over 21.3 metres, including 251 g/t silver over 6.1 metres2. BL19-09 intersected significant silver mineralization 50 to 75 metres below surface and 20 metres north along strike from BL-54 within visibly altered (silicified and oxidized) and highly quartz (+/- carbonate) veined limestones and dolomites of the Ordovician Antelope Valley Limestone unit.

The drilled areas form part of a greater mineralized trend that extends for over 1.2 kilometres along strike. The 2019 Induced Polarization and Resistivity (IP/Res) ground geophysical program generated targets that correspond well with new results. The IP/Res anomalies indicate mineralized areas may extend to depth and along strike, providing additional growth potential across the Bolo Project area.

Figure 1: Bolo Gold Silver Project BL19-09 Drill Section (Showing Resistivity) (CNW Group/Barrian Mining Corp.)

Methodology and QA/QC
The analytical work reported on herein was performed by ALS Global (ALS), Elko (sample preparation), Reno (gold fire assay) Nevada, and Vancouver (multi-element geochemistry) Canada. ALS is an ISO-IEC 17025:2017 and ISO 9001:2015 accredited geoanalytical laboratory and is independent of the Barrian and the QP. RC drill samples were subject to crushing at a minimum of 70% passing 2 mm, followed by pulverizing of a 250 gram split to 85% passing 75 microns. Gold determination was via standard atomic absorption (AA) finish 30 gram fire-assay (FA) analysis, in addition to 48 element ICP-MS geochemistry. Barrian follows industry standard procedures for the work carried out on the Bolo Gold-Silver Project, with a quality assurance/quality control (QA/QC) program. Blank, duplicate and standard samples were inserted into the sample sequence sent to the laboratory for analysis. Barrian detected no significant QA/QC issues during review of the data. Barrian is not aware of any drilling, sampling, recovery or other factors that could materially affect the accuracy or reliability of the data referred to herein.

About Barrian Mining Corp.
Barrian Mining Corp. is a new gold exploration company focused on acquiring and advancing precious metal projects in the United States. Barrian’s flagship Bolo Project, located 90 km northeast of Tonopah Nevada, hosts Carlin type gold mineralization and is fully funded and permitted for its current drill program. In addition, Barrian has an earn-in option to acquire 100% of the “Sleeper Project” which is located in the historic Mogollon epithermal silver-gold mining district of New Mexico. Barrian also has the option to acquire 100% of the Troy Canyon Project located in Nevada. Barrian is run by a strong management and technical team consisting of capital market and mining professionals with the goal of maximizing value for shareholders through new mineral discoveries, committed long-term partnerships, and the advancement of exploration projects in geopolitically favourable jurisdictions. Barrian trades on the TSXV under the ticker symbol “BARI”, on the OTC markets under the symbol “BARRF” and on the German (Frankfurt) exchanges using the ticker symbol “BM5”.

Qualified Person
The scientific and technical information contained in this news release as it relates to the Bolo Project has been reviewed and approved by Kristopher J. Raffle, P.Geo. (BC) Principal and Consultant of APEX Geoscience Ltd. of Edmonton, AB and a Director of Barrian, and Christopher Livingstone, P.Geo. (BC) Project Geologist of APEX Geoscience Ltd. of Edmonton, AB, both “Qualified Persons” as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects.  Mr. Raffle and Mr. Livingstone verified the data disclosed which includes a review of the analytical and test data underlying the information and opinions contained therein.

On behalf of the Board of Directors,

/s/ “Max Sali”
Max Sali, Chief Executive Officer

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

Forward Looking Information

This news release includes certain statements that constitute “forward-looking information or statements” within the meaning of applicable securities law, including without limitation, receipt of additional drill results, expectations of the drill results, other statements relating to the technical, financial and business prospects of the Company and its properties, and other matters.

Forward-looking statements address future events and conditions and are necessarily based upon a number of estimates and assumptions. These statements relate to analyses and other information that are based on forecasts of future results, estimates of amounts not yet determinable and assumptions of management. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as “expects” or “does not expect”, “is expected”, “anticipates” or “does not anticipate”, “plans”, “estimates” or “intends”, or stating that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved), and variations of such words, and similar expressions are not statements of historical fact and may be forward-looking statements. Forward-looking statement are necessarily based upon a number of factors that, if untrue, could cause the actual results, performances or achievements of the Company to be materially different from future results, performances or achievements express or implied by such statements. Such statements and information are based on numerous assumptions regarding present and future business strategies and the environment in which the Company will operate in the future, including the price of metals, anticipated costs and the ability to achieve goals, that general business and economic conditions will not change in a material adverse manner, that financing will be available if and when needed and on reasonable terms, and that third party contractors, equipment and supplies and governmental and other approvals required to conduct the Company’s planned exploration activities will be available on reasonable terms and in a timely manner. While such estimates and assumptions are considered reasonable by the management of the Company, they are inherently subject to significant business, economic, competitive and regulatory uncertainties and risks.

Forward-looking statements are subject to a variety of risks and uncertainties, which could cause actual events, level of activity, performance or results to differ materially from those reflected in the forward-looking statements, including, without limitation: (i) risks related to gold and other commodity price fluctuations; (ii) risks and uncertainties relating to the interpretation of exploration results; (iii) risks related to the inherent uncertainty of exploration and cost estimates and the potential for unexpected costs and expenses; (iv) that resource exploration and development is a speculative business; (v) that the Company may lose or abandon its property interests or may fail to receive necessary licences and permits;  (vi) that environmental laws and regulations may become more onerous;  (vii) that the Company may not be able to raise additional funds when necessary; (viii) the possibility that future exploration, development or mining results will not be consistent with the Company’s expectations; (ix) exploration and development risks, including risks related to accidents, equipment breakdowns, labour disputes or other unanticipated difficulties with or interruptions in exploration and development; * competition; (xi) the potential for delays in exploration or development activities or the completion of geologic reports or studies; (xii) the uncertainty of profitability based upon the Company’s history of losses; (xiii) risks related to environmental regulation and liability; (xiv) risks associated with failure to maintain community acceptance, agreements and permissions (generally referred to as “social licence”); (xv) risks relating to obtaining and maintaining all necessary government permits, approvals and authorizations relating to the continued exploration and development of the Company’s projects; (xvi) risks related to the outcome of legal actions; (xvii) political and regulatory risks associated with mining and exploration; (xix) risks related to current global financial conditions; and (xx) other risks and uncertainties related to the Company’s prospects, properties and business strategy. These risks, as well as others, could cause actual results and events to vary significantly.

Factors that could cause actual results to differ materially from those in forward looking statements include, but are not limited to, continued availability of capital and financing and general economic, market or business conditions, the loss of key directors, employees, advisors or consultants, adverse weather conditions, increase in costs, equipment failures, litigation, exchange rate fluctuations, failure of counterparties to perform their contractual obligations and fees charged by service providers. Investors are cautioned that forward-looking statements are not guarantees of future performance or events and, accordingly are cautioned not to put undue reliance on forward-looking statements due to the inherent uncertainty of such statements. The forward-looking statements included in this news release are made as of the date hereof and the Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as expressly required by applicable securities legislation.

Barrian Mining Corp. (CNW Group/Barrian Mining Corp.)

Cision View original content to download multimedia:

SOURCE Barrian Mining Corp.

View original content to download multimedia: